Due to the increasing costs of raw materials, footpeg prices will increase slightly on 1 AUGUST

RME016 KTM / Husq / Gas Edge Titanium Footpegs

Name: RME016 KTM / Husq / Gas Edge Titanium Footpegs
SKU: 4896
Availability: InStock

SKU: N/A Category: KTM / Husqvarna / GASGAS footpegs Tag: RME016

KTM, Husqvarna & GASGAS models 2018 – 2022 (EXC 2023) (KTM 85cc and over)

Check the fitment for your bike model

Made to SXF KTM / FC Husqvarna MX bikes stock height, -5mm lower than EXC / FE range stock height

£184.82 – £216.21 ex. VAT

Offset

Clear

Enter text (up to 8 characters):

Custom lasering £8.33 ex. VAT

Custom lasering

Frequent questions about RME016 KTM / Husq / Gas Edge Titanium Footpegs

Footpeg dimensions

Apex Footpegs
Platform Length: 90mm
Platform Width: 60mm
Clearance (distance from top of the footpeg teeth to underside of footpegs platform): 27mm

Edge Footpegs
Platform Length: 90mm
Platform Width: 60mm
Clearance (distance from top of the footpeg teeth to underside of footpegs platform): 27mm

Trials Footpegs
Platform Length: 75mm
Platform Width: 60mm
Clearance (distance from top of the footpeg teeth to underside of footpegs platform): 23mm

Supermoto Footpegs:
Platform Length: 75mm
Platform Width: 60mm
Clearance (distance from top of the footpeg teeth to underside of footpegs platform): 23mm

Sponsorship

We are a small UK-based manufacturer with a small production capability. Our ability to offer discounts or free product in exchange for sponsorship is highly limited. We assess each application individually, and we are unable to guarantee any discounts or help with free product until an authorised member of Raptor Titanium has given approval.

Please send all rider and team CV’s and proposals through our website contact form and we will do our best to get back to you ASAP with any help we can offer.

Custom Position Offsets

Custom position offset footpegs can be selected during the order process for your selected bike and footpeg model.

An additional charge of £33

43+VAT is applicable to all custom position offset footpegs.

There will also be an extended lead time on dispatch due to these parts not being a stock item and are always made to order.

We have these specific offsets that are listed in the ‘FOOTPEG POSITION OFFSET FIXTURE AVAILABILITY’ available due to tooling being made for previous higher quantity orders for that offset footpeg, which made it viable to produce the tooling / fixtures for that offset.
For us to consider custom position offsets outside those listed that we already have available would require a quantity order, minimum of 10 sets of footpegs for it to be viable to produce the tooling, otherwise to make a welding fixture for just one set of footpegs would make them prohibitively expensive.

We are happy to consider quantity orders for custom position offsets that are not listed in the PDF, so please contact us if you wish to discuss this.
We only make custom offset footpegs for the bike fitments in our application list.

Warranty? Replacement guarantee?

Will Raptor Titanium footpegs fit my older bike or my bike that is not listed on the application list?

Some of our modern fitment footpegs fit by coincidence older bike models that are not listed on our application list.

For example:
Our RX001 Apex and RME001 Edge fitment footpegs fit 2004 – 2006 RM250 Suzuki 2 stroke models. This is a coincidence in the designs of the two different bike manufacturers which came up with a very similar design for the mounting that sits in the hanger on the bike.

If the footpegs on your older bike model or bike model that is not listed on our application list look similar to a modern footpeg, it may be a coincidence that modern footpegs fit your bike.

For example: Some older Kawasaki KX 2-stroke models have footpegs that are identical to modern Yamaha YZF footpegs.

We assess each enquiry based on photos of the stock footpegs on your bike. Please send photos of your stock footpegs with measurements and dimensions (most importantly internal hanger width on the bike) through the contact form and we will check against the current fitments we provide to see if any match.

We do not manufacture one-off fitment footpegs for older bike models or bikes that are not in our application list.

Can I have my footpegs resharpened or can I resharpen them myself?

We do not offer a resharpening service for the footpegs. The wearing out of the teeth on our footpegs is not covered by our replacement warranty.

If you wish to resharpen your footpegs we recommend using a brand-new file to get the teeth back to sharpness. This doesn’t take long and is a popular approach for many of our customers to increase the longevity of their Raptor Titanium footpegs.